DSX Assembler. For Long Lasting Wear Protection At High Running Speeds.
DSX ASSEMBLER non-seize grease is a blend of synthetic lubricants, polyol and submicron size fluoropolymer particles that embed in, and not on, the bearing surfaces for protection against seizure on initial equipment start-up. DSX ASSEMBLER will continue to provide long lasting wear protection at high speed running.
DSX ASSEMBLER is compatible with and will blend with all motor oils (petroleum or synthetic).
Use DSX ASSEMBLER on:
- Connecting Rod Bearings
- Main Bearings
- Camshafts
- Valve Lifters
- Guides
- Rocker Arms And Pivots
DSX ASSEMBLER has been tested using ASTM D-2596, Measurement of Extreme Pressure Properties of Lubricating Greases (Four Ball Method) by FALEX Corporation of Aurora. Illinois.
Summary Of Testing Method:
The testing device is operated with one steel ball under load rotating against three steel balls held stationary in the form of a cradle. The rotating speed is 1770 RPM +/- 60 RPM. Lubricating greases are subjected to a series of tests, each test having a duration of ten seconds at increasing loads until welding (seizure) occurs.
Results:
With DSX ASSEMBLER grease, the load was increased to 800 1Kg (Machine Limit) with no weld. The scar diameter was 2.5 mm, which is very small.
DSX Assembler Wheel Bearing /U-Joint Lubricant:
- REDUCES Friction and Drag
- INCREASES Endurance
- WITHSTANDS Extreme Pressure
- REDUCES Wear
DSX Assembler Directions For Use:
Enhance your favourite Wheel Bearing / U-Joint Grease (petroleum or synthetic) by blending in DSX ASSEMBLER grease in the following ratio's
Click Here to read articles about DSX products
EFPT Products
Heron House
Station Road
Griffithstown
Pontypool
Torfaen
NP4 5ES. UK
Telephone: 0843 289 2633
Click Here to contact us by Email
_______________________
Our Defender II Liquid Wax was used on equipment in the 2010 Polar Challenge race, which helped to raise funds for
Help for Heroes.
Read The Testimonial Using
The Menu Bar Link